Concrete contractor in Danville, CA - driveways and walls built for sloped lots
Pleasanton Concrete Company is a concrete contractor based in Pleasanton, and we pour driveways, patios, pool decks, retaining walls and foundations for Danville homeowners, with the owner on site to check the forms and run the pour.

- Licensed and fully insured.
- Free in-person estimates.
- We reply within 1 business day.
Concrete work in Danville, CA
Danville is mostly single-family homes. On our jobs there, we see everything from older ranch houses with their original driveways to newer neighborhoods with wide front entries, big back yards and pools. Lots run on the larger side and plenty of them slope, so a job here often means a long driveway, a side-yard walk, steps up to the front door or a wall holding back the yard. It's the same kind of work we do next door in San Ramon and Alamo, and I drive up from Pleasanton to measure each one myself.
I spent years on commercial concrete jobs before I started this business in Pleasanton in 2023. Today we work across the East Bay, from Danville down to Ashland and on into the South Bay. A lot of what we tear out in Danville is an older slab poured on dirt that was raked flat instead of dug out and packed, so it settled, cracked and now holds a puddle or tips water toward the garage.
What we pour in Danville
Concrete driveway building
Long driveways here often climb from the street, so we dig out, pack the base and slope the slab to shed water.
Learn more about Concrete driveway buildingConcrete patio construction
A Danville patio usually meets the house at a sliding door, so we set its height and slope to run water away from it.
Learn more about Concrete patio constructionStamped concrete services
Stamped concrete presses a stone or brick pattern into a fresh slab, a common pick for Danville front entries and patios.
Learn more about Stamped concrete servicesConcrete sidewalk building
Front walks and side-yard paths to the back gate, laid out so the joints line up with the steps and the driveway.
Learn more about Concrete sidewalk buildingGarage floor concrete
When an older garage floor has cracked and sunk, we break it out, rebuild the base and pour new, sloped toward the door.
Learn more about Garage floor concreteDecorative concrete
Color, stain and exposed-stone finishes for Danville homeowners who want the driveway or patio to match the house instead of plain gray.
Learn more about Decorative concreteConcrete retaining walls
Sloped Danville yards often need a wall to hold back the hill and make room for a flat patio or lawn.
Learn more about Concrete retaining wallsConcrete floor installation
Interior slabs for Danville garage conversions, workshops and additions, poured level and smooth so the flooring that goes on top lies flat.
Learn more about Concrete floor installationConcrete pool decks
Around the backyard pools common here, we finish the deck for grip under bare feet and slope it so water drains off.
Learn more about Concrete pool decksConcrete steps construction
Front doors on hillside lots often sit several steps above the walk, and we form every step the same height so they feel even.
Learn more about Concrete steps constructionSlab foundation building
For a Danville addition or backyard unit, we pour the slab the new walls sit on, and I check the forms before the truck arrives.
Learn more about Slab foundation buildingFoundation installation
Foundations for additions on sloped lots, where one corner can sit below another, so the footing steps down to follow the ground.
Learn more about Foundation installationConcrete parking lot building
Property managers call us for parking lots at Danville offices and apartment buildings, poured for daily traffic and sloped to the drains.
Learn more about Concrete parking lot buildingConcrete footings
Footings carry the weight of a wall, a deck post or a patio cover, and we dig each to firm ground before we pour.
Learn more about Concrete footingsFoundation raising
Older Danville houses that have settled out of level can sometimes be raised back. I'll tell you on site whether raising beats rebuilding.
Learn more about Foundation raisingConcrete cutting
We saw-cut old driveways for removal and open garage slabs for plumbing work, with clean edges so new concrete meets the old neatly.
Learn more about Concrete cutting
What Danville's sloped lots ask of concrete
A lot of Danville houses sit on lots that fall toward the street or climb into a hill, so the first thing I check on an estimate is where your water goes. A driveway or patio that tips toward the house sends runoff at the foundation and the garage door, so we set the slope before a single form goes in. Then we dig out the soft dirt and pack a new subgrade, the layer the slab sits on, because a slab only stays flat as long as what's under it does. Nobody sees that base on pour day, and it's the first thing people want to cut from a budget, which is why it's the one part I won't cut. I'll also tell you plainly that a new slab can still crack, because all concrete shrinks as it dries. We cut control joints, straight grooves that give it a place to crack, soon after the pour so the cracks follow our lines, and rebar, the steel set inside the slab, keeps the pieces tied together.
Sloped yards also mean retaining walls, and the Town of Danville requires a permit for a wall taller than 4 feet, measured from the bottom of the footing to the top of the wall, or one holding back extra weight like a slope or a driveway above it. On any job here, the price moves with how much old concrete comes out, how much base work the ground needs, how easy the spot is to reach and the finish you pick. The schedule turns on whether a permit is needed and on curing, the time a new slab needs to harden before it takes your weight and then your car's. Your written estimate breaks the price down line by line.
Get a written estimate for your Danville concrete job
Tell us the job site address and what you'd like poured, and we'll reply within one business day to set a time for me to come out and measure. The on-site estimate is free, written line by line, with no obligation.
Questions we hear in Danville
How do I find out if my concrete project in Danville needs a permit?
The city's Building Division issues permits for most construction and repair projects in Danville, and its list names work such as structural changes, additions, decks and pools without covering every job. If your address sits outside the city limits, Contra Costa County covers it instead, and the permit desk at (925) 314-3330 can tell you which side of the line you're on. Before work starts, we confirm which office covers your address, and when a permit is needed we take care of the application and the inspections and keep you posted.
Does the sewer district need to stamp my plans for a new slab in Danville?
Only for some projects, and for those the Central Contra Costa Sanitary District has to stamp the plans before the city application goes in. The city's examples include adding or moving plumbing fixtures, building out past the house's existing footprint, and adding a deck, a carport or an ADU, a backyard unit, so a slab for an addition, a carport or a backyard unit falls on that list. Because the stamp comes first, we look at this early on any job that adds to the house.
What hours can a concrete crew work in Danville?
Construction in Danville is allowed from 7:30 a.m. to 7 p.m. Monday through Friday, and from 9 a.m. to 7 p.m. on Saturdays, Sundays and holidays. Projects that went through a discretionary review with the city can be held to tighter hours. We book the concrete truck early in that window, because a slab finished in the heat of the afternoon tends to end up with a weak, dusty top.
How long does a building permit last in Danville?
Once the city issues a permit, there are 365 days to finish the work. An approved permit that isn't issued within 180 days expires, and the fees paid on it are lost. Inspections can be booked as soon as all fees are paid, and we schedule them around the pour so nothing gets covered before it's checked.
What drives the cost of a concrete driveway in Danville?
Size, tear-out, base work and finish set most of the price. Breaking out and hauling the old driveway, digging out soft ground and packing new base, the length of a sloped drive, how close the truck can get and a stamped or colored finish all add to it, while a plain broom finish, the brushed texture that gives tires and shoes grip, keeps it down. If the budget's tight, I'll trim the finish before the base, because a nice surface on a poor base settles and cracks just like the old one did.
Does a concrete contractor in Danville need a California license?
Yes, whenever the whole contract, labor and materials included, comes to $500 or more. The Contractors State License Board says anyone in the home improvement business has to be licensed in the right trade before they advertise or bid on the work. We're licensed and fully insured, our work is backed by our satisfaction guarantee, and the person who writes your estimate is the one on site running your pour.
Planning concrete work in Danville?
I'll come out to measure, check the base and drainage, and write up an estimate that lists each part of the job.
Other cities we work in
We're based in Pleasanton and work in the cities around it, so if yours isn't listed here, call (925) 468-2730 or send us the form.




